How it works
From your phone to a finished piece in three steps. No design software needed.
- 1
Personalize
Type your text and choose from the options each design allows. Everything else stays fixed, so the artwork always comes out right.
- 2
Download
Tell us what you own, and you get one zip with the files that machine needs.
Print layer PNG at exact size Cut lines SVG in millimeters Project file Ready to open in your software License What you can do with it - 3
Make it
Print and cut in one job, print onto a blank you cut first, or engrave the lines and paint it. Your machine decides which.
Pick your path
You choose this on the design page, and the files change to match.
xTool M2
Prints and cuts in one job
The artwork prints and the outline cuts in one job, on one machine.
eufyMake E1 UV printer
A laser cuts the blank, then the E1 prints on it
Cut the blank first on your laser, tape it into the printed outline, then the E1 prints the artwork on it.
Any laser
Engraves the lines and cuts. You paint it
No print: your laser burns the artwork's lines and cuts the outline, and you paint the piece.
What cuts it
- xTool M2
- xTool S1
- xTool P2
- xTool P2S
- xTool P3
- Any laser running LightBurn · .lbrn
- Glowforge · SVG
- Something else · SVG, DXF and .lbrn
Plus 3 mm and 1/4 in wood, 250 g cardstock, and acrylic on a CO2 laser.
Questions
On an xTool: the project opens as a plain image.
Select it in xTool Studio and click Convert to Print then Cut once. The cut lines are already in place.
On any other laser: which file do I open?
The .lbrn if you run LightBurn, with the cut and engrave layers already separated. Otherwise the SVG, imported at its original size, or the DXF if your software won’t open an SVG.
Do I need the artwork’s fonts?
No. Text is turned into outlines before the files are written, so your text looks the same on any computer.